Well water treatment · Pinellas & select surrounding counties

Your well doesn’t have to ruin your water.

Every recommendation starts with the water at your home. Aqua Pro serves well-water homes throughout Pinellas County and takes on select surrounding-county projects when the scope and travel make sense. The owner tests, designs, and installs the system — no handoff from a sales rep to a subcontractor.

Get My Free Water Test or call (727) 342-0091

Read the clue before you buy equipment.

01 · Stain

Iron — the orange one.

Orange rings in the toilets. Orange streaks in the tub. White laundry coming out dingy no matter how much bleach you throw at it. That’s iron. Well water around here is loaded with dissolved iron — you can’t always see it coming out of the tap, but you’ll see it on everything it touches. The good news: iron is one of the easiest problems to fix when the system is sized right.

02 · Odor

Sulfur — the rotten-egg one.

Before you spend a dime, here’s a trick worth knowing: if the smell only shows up in the hot water, it’s probably not your well at all — it’s your water heater. The anode rod in the tank reacts with bacteria and makes hydrogen sulfide. Smell in both hot and cold? That’s your well, and that’s mine to fix.

03 · Tint

Tannins — the tea-colored one.

Yellow or brown tint, usually worse after a big rain. Here’s my honest take: a tannin filter is overkill on about 9 out of 10 well systems I see. The exception is a shallow well near a lake — then it’s cheap insurance after a storm. If someone tries to sell you a tannin system on day one, get a second opinion.

04 · Safety

Bacteria — the one you can’t see at all.

This is the one people sleep on. After Hurricane Ian, 22% of private wells tested in Seminole County came back positive for coliform or E. coli. Floodwater gets in, and suddenly the water’s not safe to drink. The state health department tells well owners to test every year for bacteria and nitrates — most people never test it once. The free test I do at your tap screens the water; when bacteria is the question, I take a sample to a certified lab and walk you through the results. If it’s positive, I chlorinate the well and retest until it’s clean.

What the iron number actually means

Orange stains tell you iron is there. They do not tell you how much. Here is the scale I use when I test a well.

The United States Environmental Protection Agency (EPA) sets a secondary guideline for iron of 0.3 milligrams per liter, which is the same as 0.3 parts per million (ppm). Secondary means it is not an enforceable health limit — it is a taste-and-staining guideline. The EPA lists the effects above it as rusty color, sediment, metallic taste, and reddish or orange staining, and says these contaminants are not considered a risk to human health at that level. Over 0.3 is not a violation, especially on a private well, which no utility regulates at all. It is the line where most people start seeing orange on everything the water touches.

City water shows you where a treated system sits on that scale. Pinellas County Utilities, in its own 2025 report, put iron at an average of 0.058 parts per million, with samples ranging from 0.018 to 0.097 — about 19 percent of the 0.3 guideline on average, and about 32 percent even at the top of its range. Tampa, Pasco, and Polk do not publish a finished-water iron number in their reports at all. A well gets no report and no treatment plant, so the only iron number that exists for a well is the one somebody measures at that house.

That is why the reading matters more than the stain. If a well test comes back at 1.0 part per million, that is more than three times the guideline — an arithmetic example, not a figure from any one house. At that level the staining is not a mystery and it is not going to rinse away. It also changes how I size the system, which is why I test before I quote anything.

One more number worth knowing, because the stain color points to two different problems. Manganese, which often shows up in the same wells as iron, has an EPA secondary guideline of 0.05 milligrams per liter — one-sixth of the iron guideline. Above it, the EPA lists black to brown color, black staining, and a bitter metallic taste. Orange points to iron. Black points to manganese. Same bathroom, different problem, different fix — and the color is the first clue I read when I walk in.

Sources

Two-tank water treatment installation outside a house, beside the existing pressure tank
Two-tank well-water install going in outside the house, beside the home’s existing pressure tank.
0.3 ppm

The United States Environmental Protection Agency secondary guideline for iron — a taste-and-staining guideline, not an enforceable health limit. It is the line where most people start seeing orange on everything the water touches.

Main water line entering the house at the installation tie-in point
Where we tie in: the main water line entering the house.

What the sulfur smell actually tells you — and what it doesn’t

Sulfur is one of the six readings on the free test, and it is the odd one out. Iron has a federal guideline. Sulfur — hydrogen sulfide gas — has none. The United States Environmental Protection Agency (EPA) sets no drinking-water standard for it at all, not even a secondary taste-and-odor guideline. The reason is plain: a level high enough to be a health concern makes the water so foul nobody would drink it first. So for this one reading, your nose is the scale — and here is how that scale actually runs, in milligrams per liter, which is the same number as parts per million.

Most people can smell hydrogen sulfide at 0.5 milligrams per liter. Below 1, it reads musty or swampy — easy to blame on the drains. At 1 to 2, it is the full rotten-egg smell, and at that level the water is very corrosive to household plumbing: it tarnishes silver, discolors copper and brass, and leaves yellow or black stains on fixtures. Heat forces the gas out of the water, which is why the shower is where most people notice it first, and why the smell can sound worse than the number behind it.

Where the smell shows up tells me where to look before I quote anything. The Florida Department of Health lays it out four ways, and it is more exact than the hot-versus-cold trick most people hear. Smell only from the hot faucet: the problem is likely in your water heater. Smell in hot and cold, but only in the treated water and not the untreated water: sulfur bacteria in the water softener. Strong when you first turn the water on, then weaker or gone after it runs a while, or changing over time: sulfur bacteria in the well or the plumbing. Strong at first draw, more or less constant, and still there after the water runs: hydrogen sulfide in the groundwater itself. The department’s other Florida fact is the one that matters here — this gas can occur in wells anywhere in Florida. Four different sources, four different fixes, and three of them are not a new well system at all.

Here is the honest limit, and I will not sell past it. The smell does not tell you whether the water is safe. The Florida Department of Health says sulfur bacteria are not harmful, and that in most cases the rotten-egg smell does not relate to how clean the water in a well is. What proves a well is safe is a bacteria test — total coliform and E. coli, on a regular basis — and that is a certified lab test, not a field reading. The free test at your tap measures the sulfur level and sorts out which of the four sources you have. If the bacteria question is open, I will tell you straight that it needs the lab.

Sources

What my well systems don’t look like.

A conventional well-water setup can mean a long row of equipment and a long maintenance list. That’s a lot to own, a lot to service, and a lot to squeeze beside the house.

My systems use a proprietary Aqua Pro treatment process designed to handle the iron and sulfur the test actually finds. The homeowner gets about half the equipment of many conventional well setups, a smaller footprint, and less to maintain. I keep the process private. I make the result and the price easy to understand.

Default treatment targets iron and sulfur — the two problems behind most Tampa Bay well complaints. The exception is phosphate-mining country: in parts of Polk County the water chemistry is different, and the system design changes with it. The test tells us which version your water needs.

$3,000 – $3,100

Iron + sulfur combo from me, installed

$3,500–$6,500

National-brand dealers, installed — typical range for a comparable system

Selling a house on a well?

Quick heads-up most people don’t know: Florida doesn’t require a well-water test when a house sells. But if your buyer has an FHA, VA, or USDA loan, the lender requires one — no passing test, no closing. I do free pre-listing screenings at the tap so there’s no surprise a week before closing. And if the official test comes back bad, I fix it — chlorination and retest for bacteria, real treatment for iron and sulfur — and handle the certified lab test for the lender. One call, the water side’s handled. Call (727) 342-0091.

Certified lab testing, sold as a service.

The free field test covers hardness, iron, sulfur, chlorine, pH, and TDS — the conditions behind most equipment decisions. When the question needs a certified laboratory — bacteria, nitrates, or PFAS — that’s a paid Aqua Pro service: I take the sample, send it to the certified lab, and walk you through the report line by line.

Check the latest official water results where I work

The record goes home with you — on paper

Nobody tests a private well but you, so the numbers from your install-day test get written down — and they go home on a sheet built for it. The Well Water Record & Care Guide is a printable paper that lives at your unit: your install-day hardness, iron, and sulfur numbers, the settings exactly as they were set, the once-a-year bacteria and nitrate test log the state health department recommends, the warning signs that mean a problem is coming back, and the three-step leak drill.

Print it, fill it in with me at the install, and keep it at the unit. Already have a well system — mine or anyone's? The same sheet works: write down today's numbers and settings, start the test log, and you have a record from now on.

Well-water questions, straight answers.

How is well water different from city water?

Nobody tests it but you. City water gets tested by the utility on a schedule; the EPA’s rules don’t cover private wells at all. That’s why the state health department tells well owners to test every year — for bacteria and nitrates at minimum. The free test I do at your tap takes 20 minutes and shows you the hardness, iron, and sulfur levels behind most well-water complaints — and I’ll tell you straight when something needs a certified lab test instead.

How much does a well-water system cost?

For iron and sulfur together, a whole-house well setup from me runs $3,000 to $3,100 installed — most iron-and-sulfur jobs land right in that range, though the final price differs per job and can land outside it. Softening + iron starts from $2,185. Big-dealer quotes for a comparable setup typically land between $3,500 and $6,500. The free test at your tap tells me exactly which version of the system your water needs — one straight price, no kitchen-table sales pitch.

Do I need a tannin filter?

Probably not. A tannin filter is overkill on about 9 out of 10 well systems I see. The exception: a shallow well near a lake, or tea-colored water that gets worse after rain — then it’s cheap insurance. I’ll tell you straight at the test.

What causes the rotten-egg smell?

Sulfur — hydrogen sulfide gas. Quick check: smell only in the hot water, and it’s your water heater’s anode rod reacting. Smell in hot and cold, and it’s your well. Either way, the free 20-minute test sorts out which one it is.

How long does a well system last?

The equipment runs 10 to 15-plus years with normal maintenance. My setups carry about half the equipment of a conventional well system, which means fewer parts to fail and fewer service calls. For hardness, see my water softeners page.

After a hurricane, do I need to test my well?

Yes. Floodwater is the number-one way bacteria gets into a well — after Hurricane Ian, 22% of wells tested in Seminole County came back positive. Test after any flooding, and don’t drink it until the test is clean. I do the screening free and run the certified lab test when it’s needed.

Find out what's in your water — free.

About 20 minutes at your tap. You keep the results whether you buy from me or not.

Get My Free Water Test Call (727) 342-0091