City water / municipal water systems · Pinellas & Tampa Bay

City water, treated at every tap.

Your utility makes the water safe. It does not make it soft, and it does not make it taste good. This is the home for city-water homes: softening for the hardness, carbon for the chlorine and chloramine, sized from the free test at your tap — the owner tests, designs, and installs, with no handoff to a sales rep.

Get My Free Water Test or call (727) 342-0091

The disinfectant in your city water, in real numbers

City water has to carry a disinfectant all the way to your tap — that is what keeps it safe in the pipes. Around Tampa Bay that disinfectant is usually chloramine, chlorine bonded with ammonia. The United States Environmental Protection Agency (EPA) caps both chlorine and chloramine at 4.0 parts per million, measured as an annual average. Here is where the local systems actually ran in their own 2025 reports: Pinellas County Utilities at 3.8 — about 95 percent of the federal limit. The City of Tampa at 3.6 — about 90 percent. The City of Clearwater at 3.18 — about 80 percent.

None of that is a violation, and I will not dress it up as one. The real questions at your house are taste, smell, and equipment: chlorine is what wears out softener resin fastest, and you can taste it well below 4.0. That is why the carbon goes in ahead of the softener on my installs — and chloramine is the stubborn one, so the carbon is sized for the disinfectant your system actually uses. The full breakdown lives on the whole-house filtration page.

The disinfectant, measured against the federal cap

Pinellas County Utilities3.8 ppm · about 95% of the cap
City of Tampa3.6 ppm · about 90% of the cap
City of Clearwater3.18 ppm · about 80% of the cap

The bar ends at the federal cap: 4.0 parts per million for chlorine and chloramine, measured as an annual average, set by the United States Environmental Protection Agency (EPA). The local figures are from each utility’s own 2025 report, as detailed above — legal water, running close to the limit, which is exactly why taste, smell, and resin wear show up at your tap.

Softening is half the job. Filtration is the other half.

A softener takes out the hardness — the scale on your faucets, the spots on your glass, the wear on your water heater. It does nothing for taste or smell. Whole-house filtration handles the confirmed condition at the point where water enters your home, so every tap gets the benefit: sediment, taste, odor, chlorine, iron, and sulfur all behave differently, and one filter does not solve every problem. The correct media, tank size, and flow rate depend on the water test and how your household uses water — which is why the test comes before the quote, every time.

Start with water softeners for the hardness side, whole-house filtration for the treatment side, or run the estimator to see your rough range first.

Check the latest official water results where I work

City water treatment where you live

Find out what's in your water — free.

About 20 minutes at your tap. You keep the results whether you buy from me or not.

Get My Free Water Test Call (727) 342-0091