We call
Confirm the home, water source, and a good time.
We come to you, test your water, and explain the results in plain English—free. No obligation and no sales pitch.
Confirm the home, water source, and a good time.
Test, service, or install — whatever you requested.
Keep the results. No pressure.
A water softener, carbon filter, iron system, and drinking-water filter solve different problems. Testing keeps you from buying the wrong equipment or replacing a system that only needs a simpler correction.
Licensed & Insured · Locally owned · Owner-installed
Six readings that explain most of what homeowners see, taste and smell — in words, not lab jargon.
The minerals that leave white spots on glasses, crust on faucets and scale inside your water heater. Pinellas County water runs about 210 parts per million.
The disinfectant your city adds to keep water safe on its way to you. In Pinellas County it’s chloramine — the source of that pool-like taste and smell.
The cause of orange and rust-colored stains in sinks, tubs, toilets and on laundry. Most common on well water.
The “rotten egg” smell some homes notice, especially from hot water. We check whether it’s there.
Whether your water leans acidic or alkaline. It affects how water treats your pipes and fixtures.
A single reading of everything dissolved in your water. It’s a quick snapshot of overall water quality.
A hardness number by itself doesn’t tell you much. Here is the scale the United States Geological Survey (USGS) uses, in milligrams per liter and in grains per gallon — the unit I read at your tap. One grain per gallon equals 17.1 milligrams per liter.
Your house can sit higher or lower than the county number. The free test takes about 20 minutes at your tap and puts your number on this scale. Then you decide.
Scale: United States Geological Survey, Water Basics Glossary. Local numbers: Pinellas County, City of Tampa, and Polk County 2025 water quality reports — the same reports linked on the County Water Results pages.
pH is one of the six readings on the free test, and it is the one nobody explains. It tells you whether your water leans acid or alkaline, and here is the scale I read it against.
The United States Environmental Protection Agency (EPA) puts the pH guideline at 6.5 to 8.5. It is a secondary guideline, which means it is not an enforceable health limit — it is a taste-and-pipes guideline, and the EPA says contaminants at these levels are not considered a risk to human health. What changes at the ends of the range is what the water does in your house. Below 6.5, the EPA lists a bitter metallic taste and corrosion — the end that eats pipes and stains fixtures blue-green. Above 8.5, it lists a slippery feel, a soda taste, and deposits, and it puts pH on its own list of the things behind scale and sediment in pipes and heaters.
Here is where Tampa Bay actually sits, from the systems’ own 2025 reports. Pinellas County Utilities reported a pH range of 7.90 to 8.11. The City of Tampa averaged 7.88. Polk County’s Central system reported 7.8. Every one of them is inside the guideline, and every one of them sits in the upper half of it — the top of Pinellas’s range is within about four-tenths of the 8.5 ceiling. Nobody around here has the acid end of the problem. We have the deposit end.
That is why I read pH and hardness together. pH does not measure hardness. The same Pinellas report that puts pH at 7.90 to 8.11 puts hardness at 11.1 to 14.3 grains per gallon — very hard water, running at the alkaline end of the federal range. The hardness is the scale itself; the high-end pH is part of why it builds up in your heater and on your fixtures instead of rinsing through. A pH reading by itself never sold anybody a system at my table. It tells me how to read the other five numbers, which is why it is on the test.
About 20 minutes at your kitchen tap. Add a few more minutes if you have questions — we’ll answer every one.
Yes. The test happens inside your home at the kitchen tap, so someone needs to be there to let us in and hear the results.
No. We need running water at the tap to take the sample, so leave everything on and use your water as you normally would.
We explain each result in plain language and leave you a written summary. If your water is fine, we’ll tell you. If something needs attention, you get straight options — and the decision is yours. No obligation, no pressure.
Yes. The in-home water test is free, with no obligation to buy anything. You keep your results either way.
Pick a callback time. We’ll call you back as soon as possible during business hours.
Licensed & Insured · Locally owned · Owner-installed
No obligation and no sales pitch. The test takes about 20 minutes at your tap.